How often should I clean my fascia boards?

We recommend cleaning fascia boards at least twice a year: in the spring (to wash away winter deposits) and in the autumn. By keeping up with this, you prevent green algae and dirt from penetrating the paint layer or the top layer of the plastic (such as Trespa or Keralit). Regular maintenance significantly extends the life of your paintwork and prevents wood rot.

How can I safely clean fascia boards without a ladder?

The safest way to clean high fascia boards is from the ground with a telescopic pole. This allows you to avoid dangerous situations on a wobbly ladder. With an Eagle Extend® telescopic pole, you can work stably at heights of up to 12 m. Due to the rigid construction, you can apply sufficient pressure from the ground to scrub away stubborn dirt, even under dormers and gutters.

What is the best way to clean Trespa or Keralit fascia boards?

Plastic fascia boards such as Trespa and Keralit are low-maintenance, but not maintenance-free. Always use a scratch-free brush (such as our 5-Sided Wash Brush) and a non-aggressive cleaning agent for cleaning. Avoid scouring pads or high-pressure washers up close, as these can damage the top layer, causing dirt to adhere faster. Our All Purpose Cleaner has been specially developed to safely clean plastic and HPL panels.

How do I get green algae off my fascia boards?

Green algae often develops in spots with little sun. The most effective method is a combination of soaking and brushing. Use a soap dispenser (such as the SoapFlow) to apply a cleaning agent with foam. Let this sit for a short time to soak and loosen the algae. Brush the surface vigorously clean with water. By using a telescopic pole with water flow, you rinse away the loosened algae immediately for a clean result.

Which cleaning agent is suitable for wooden fascia boards?

For wooden fascia boards, it is important to use a biodegradable all-purpose cleaner that does not damage the paint. Aggressive agents such as chlorine or methylated spirits can dull the gloss of your paintwork. Opt for an All Purpose Cleaner that tackles atmospheric pollution (soot, fine dust) and organic pollution (algae) without damaging the protective paint layer.

What does it cost to have fascia boards cleaned?

Having fascia boards, gutters, and dormers cleaned by a professional company easily costs between €150 and €300 per visit, depending on accessibility and the use of scaffolding or cherry pickers. By investing in an Eagle Extend® set (one-time purchase between €125 and €250), you often earn back these costs after cleaning it yourself just once or twice. After that, you clean your house for "free" for years to come.

5-year guarantee on all our poles · Free delivery on orders over €50 · Order by 4pm CET, dispatched same day5-year guarantee on all our polesFree delivery on orders over €50Order by 4pm CET, dispatched same day

Fascia and soffit cleaning without a ladder

Fascia and soffit cleaning is easy to do yourself with an Eagle Extend® water-fed pole — safely from the ground, with no ladder.

See the 5-Sided Brush Try the Pole Finder

Safely from the ground, to protect your woodwork

Why clean fascias with Eagle Extend®?

Whether your fascias are timber, uPVC or HPL panels such as Trespa, regular care extends their life considerably. A standard broom is too hard and scratches, and a cheap telescopic pole wobbles too much to scrub off stubborn algae:

Safe on paint and plastic: the soft fibres of the 5-Sided Wash Brush remove algae and dirt without scratching paintwork or HPL panels.

Scrubbing power through rigidity: the Aluminum Supreme and Carbon Fiber poles are extremely rigid and don't bend — your effort goes straight into the dirt.

Protection with HexaLock®: under the eaves, the last thing you want is a brush that twists. The HexaLock® connection locks it firmly in place, so you can clean the underside of the gutter and narrow edges properly too.

Reach every gable: with lengths up to 12 metres (39 ft), you can easily reach the highest gables and dormers — straight from the driveway.

Do the maths: the pole pays for itself

Hiring a decorator or cleaning company for fascias and dormers can easily cost €150–250 a visit, including scaffolding or an access platform. After one or two cleans, an Eagle Extend® kit has paid for itself — and you can use the same pole for window cleaning and solar panels. Not sure? Start with the Pole Finder.

Step by step

How to clean fascias and soffits in 4 steps

With a little preparation, cleaning your fascias is safe and effective. Here's how.

Pre-treat and lather up

Fascias are often greasy from soot and algae, so water alone isn't enough. Fit the SoapFlow soap dispenser between your tap and the pole and fill it with Allround Cleaner — it loosens airborne grime and green algae without harming the surface.

Extend the pole

Stand the pole upright and extend it to the height you need; the SureLock™ clamps stop it from sliding down. Ideally, use the 5-Sided Wash Brush: with bristles on the sides, you never knock a hard brush block against your paintwork.

Brush and foam

Turn on the tap and switch on the soap dispenser. Apply a layer of foam, leave it for a moment (don't let it dry) and scrub the surface thoroughly. Tip: don't forget the underside of the soffit — that's where cobwebs tend to hang.

Rinse clean

Switch off the soap and rinse with clean water. Doing the windows at the same time? The PureFlow water softener gives you a streak-free finish without limescale marks.

5-Sided Wash Brush

Our favourite for woodwork: bristles all round (on the sides too), so you can work into corners and along edges without damaging the paintwork.

Shop 5-Sided Brush

Allround Cleaner

Essential for fascias: dissolves soot, fine dust and green algae. Safe on paint, uPVC and HPL panels such as Trespa.

Shop Allround Cleaner

See it in action

Eagle Extend® at work

The 5-Sided Wash Brush on an Eagle Extend® telescopic pole removes green algae from fascias, working from the ground. It shows how the HexaLock® system (swap attachments in one click) and the SureLock™ clamps work together, safely from the ground. Press play to start the video.

Frequently asked questions about cleaning fascias

Answers to your questions, plus expert tips for the best result.

See all FAQs

Related applications

Clean window frames, doors and exterior woodwork

Window frames & woodwork

Keep soffits, bargeboards and window frames clean — and add years to the life of your paintwork.

Clean high and upstairs windows from the ground

High window cleaning

Get upstairs and dormer windows streak-free — without a window cleaner or a ladder.

Clean render, brick and cladding on your house

Exterior wall cleaning

Remove algae and airborne grime from brick, render or cladding — without a pressure washer.

Not sure which kit you need?

Tell us what you want to clean, and our Pole Finder will put together the right combination in two minutes.

Start the Pole Finder See the kits